Materials2

Editor GitHub co-design-modelslibraries fdm specs models thingsMaterials2

Editor

Visualization

catalog { ''' PLA https://en.wikipedia.org/wiki/Polylactic_acid ULTEM https://en.wikipedia.org/wiki/Polyetherimide ABS https://en.wikipedia.org/wiki/Acrylonitrile_butadiene_styrene ''' provides service_temperature [C] "Temperature that the produced part can resist." requires liquefaction_temperature [C] "Temperature required for liquefaction." requires specific_cost [$/kg] "Cost per unit weight." requires density [g/mm³] 65 C ⟻ PLA ⟼ 205 C, 20 $/kg, 1 g/mm³ 105 C ⟻ ABS ⟼ 240 C, 20 $/kg, 1 g/mm³ 217 C ⟻ ULTEM ⟼ 335 C, 200 $/kg, 1 g/mm³ }

Diagramremove
Other informationremove

Internal representation details

SimpleWrap                                                                                                               
│  provides   service_temperature   {65,217,105} C │ requires   liquefaction_temperature   {240,205,335} C               
│                                                  │ requires   specific_cost              SB({20, 200}) $/kg            
│                                                  │ requires   density                    {1 g/mm³}                     
└ DP_Catalog {65,217,105} C  ⇸  WU ⟨C,$/kg,g/mm³⟩                                                                        
                                └ Π<3>                                       65 C   ↤  PLA    ↦  ⟨205 C,20 $/kg,1 g/mm³⟩ 
                                  ├ liquefaction_temperature: {240,205,335}  105 C  ↤  ABS    ↦  ⟨240 C,20 $/kg,1 g/mm³⟩ 
                                  ├            specific_cost: SB({20, 200})  217 C  ↤  ULTEM  ↦  ⟨335 C,200 $/kg,1 g/mm³⟩
                                  └                  density: SB(1)                                                      
   catalogue(𝒇, 𝒓)